Skip to main content

RiDom Admin Panel Quick Guide

IMPORTANT!

Edit mode
Equipment settings can be changed only during active service maintenance. In normal mode, the parameters are view-only.

Panel limitations
You can change the parameters of existing devices, but adding new devices and removing old ones is possible only via the mobile application.


1. HOW TO START WORKING WITH AN OBJECT?

To change the Ri-HUB configuration, you need to create a request.

Step 1. Creating a request (learn more ...)

  1. Go to the Requests section → Create request.
  2. Fill in the fields:
    • Control center: select the required object.
    • Date and time: specify the planned time of work (a time in the past cannot be specified).
    • Assignee: select yourself or a colleague.
    • Title: briefly describe the essence (for example, "Change auto-testing settings").
  3. Click Create. Request status: "Awaiting confirmation".

Step 2. Starting maintenance
The "Start maintenance" button becomes active only when two conditions are met:

  • ✅ The scheduled start time of work has come.
  • ✅ The object is fully disarmed.

Important: If the object is armed, the system will block changes to the settings.

How to start maintenance (learn more ...)

  • Option A: Open the created request and click "Start maintenance".
  • Option B: Go to the Objects section, select the control center and click "Start maintenance".

2. DURING WORK AT THE OBJECT

  • All settings fields of the controller and devices are unlocked.
  • Each saving of changes is logged by the system.
  • Session timeout: 90 minutes.
    • A notification will arrive 5 minutes before the end.
    • The session can be extended no more than 2 times.
    • When the request timer expires, the session ends automatically.
  • Request status: "In progress".

3. COMPLETING THE WORK

A mandatory condition for closing a request is filling in the report!

  1. Return to the request under which the work is being performed.
  2. Click "Complete request".
  3. Fill in the "Maintenance report" field (describe what was done).
  4. Save.

❌ Without a report, the request will not close, and the object may remain in maintenance mode until the session timeout expires.


CHECKLIST BEFORE LEAVING THE OBJECT

  • All settings are saved and checked.
  • The work report is filled in in detail.
  • The request is closed (status "Completed").
  • The object is armed (if required by the regulations).

SECURITY AND ACCESS

  • Password: If you forgot your password, contact the Administrator. The system does not store passwords in plain text; they can only be reset. Learn more about issuing a password ...
  • Privacy: In the mobile application, the object owner sees only the fact of the start and end of work. The details of the changes are not available to them.

Last updated: 10/14/2026